行业动态
四方国瑞电力公司供应微水检测仪价格优惠
发布日期:2020-09-15 点击:1434次
微水检测仪产品简介:
该仪器无论从测量原理、自动化程度、使用的方便性而言都有着同类仪器无法比拟的先进性,特别是采用了欧洲标准技术,确保数据准确可靠。智能微水测量仪测量范围宽、响应时间快、测量周期短,显示直观,操作简便。该仪器适用的领域非常广泛,空气、氮气、惰性气体以及任何不含腐蚀性介质的气体的湿度测量,尤其适合于SF6气体的湿度测量,电力、石化、冶金、环保、科研院所等部门均可采用,有着极高的性价比。
微水检测仪技术参数:
1、测量范围:-80℃ ~ +20℃(露点)
2、测量精度:±2℃ (-80℃ ~ -50℃)
±1℃ (-49℃ ~ +20℃)(工作范围)
3、测量时间:≤3分钟/点
4、采样流量:300ml/min±20%
5、显示方式:液晶显示器、全中文界面、带背光
6、电 源:交直两用,充电电池可连续工作8小时
7、检验方式:开机自校功能
8、整机重量:3.5kg
9、整机尺寸:长×宽×高=250mm×100mm×300mm
微水检测仪技术特点:
1、快速测量:开机后无须预加热,快速达到露点饱和状态。
2、快速省气:测定时耗气仅2L(101.2kPa)左右。
3、自锁接头:采用德国原装进口自锁接头,安全可靠,无漏气。
4、数据存储:采用大容量设计,zui多可存储60组测试数据。
5、显示清晰:液晶屏直接显示露点、微水(ppm)、环境温度、环境湿度、 时间及日期、电池电量等内容。
6、便携式设计:仪器更轻,携带、使用方便。
7、内置电源:内置可充电电池,一次充足可连续工作8小时。
英文翻译
Product introduction:
The instrument has the advanced nature of the same kind of instrument, no matter from the measuring principle, automation level and convenience of use, especially the European standard technology, so as to ensure the accuracy and reliability of the data. The intelligent micro water measuring instrument has the advantages of wide measuring range, fast response time, short measuring period, intuitive display and easy operation. The instrument can be used in a wide range of fields, such as air, nitrogen, inert gas and any gas without corrosive medium. It is especially suitable for the humidity measurement of SF6 gas. It can be used in power, petrochemical, metallurgy, environmental protection, scientific research institutes and other departments, and has a high cost performance ratio.
Technical parameters:
1. Measurement range: - 80 ℃ ~ + 20 ℃ (dew point)
2. Measurement accuracy: ± 2 ℃ (- 80 ℃ ~ - 50 ℃)
± 1 ℃ (- 49 ℃ ~ + 20 ℃) (working range)
3. Measurement time: ≤ 3 minutes / point
4. Sampling flow rate: 300ml / min ± 20%
5. Display mode: LCD, full Chinese interface, backlight
6. Power supply: AC and DC, rechargeable battery can work continuously for 8 hours
7. Test mode: start self calibration function
8. Weight: 3.5kg
9. Overall size: length × width × height = 250mm × 100mm × 300mm
Technical features:
1. Fast measurement: no need to preheat after start-up, quickly reach dew point saturation state.
2. Fast gas saving: the gas consumption is only about 2L (101.2kpa).
3. Self locking joint: imported from Germany, safe and reliable without air leakage.
4. Data storage: with large capacity design, Zui can store more than 60 groups of test data.
5. Clear display: the LCD directly displays dew point, micro water (PPM), ambient temperature, environmental humidity, time and date, battery power, etc.
6. Portable design: the instrument is lighter, portable and easy to use.
7. Built in power supply: built in rechargeable battery, which can work continuously for 8 hours at a time.